Makita 40V max XGT Brushless Cordless 5-Piece Combo Kit (4.0Ah) - GT500M
The Makita XGT 40 Volts max cordless 5-piece combo kit has premium tools that are ideal for all your drilling, cutting, and driving applications. This kit contains GPH01Z, GDT01Z, GRJ01, GSR01, ML001G, two 40 Volts max XGT 4.0 Ah batteries, a charger, and a tool bag. The 2-speed hammer driver-drill is built with a brushless motor, which offers the optimum performance of 0 - 650 and 0 - 2600 RPM, 0 - 9750 and 0 - 39000 BPM, as well as 1250 in-lb of torque. The impact driver with 4-speed power selection ensures a maximum torque of 1950 in-lb. The recipro saw offers 1-1/4 Inch stroke length as well as 0 - 2300 SPM at low mode and 0 - 3000 SPM at high mode. The 7-1/4 Inch circular saw embedded with a 6400 RPM brushless motor offers up to 2-9/16 Inch cuts at 90 degrees. This kit comes with 4 LED flashlights, which provide high illumination of 160 lumens. The XGT digital communication safeguards the device from overload, over-discharge, and overheating, thus making this tool perfect for use in heavy-load applications. The XGT multi-layer contact interface and sturdy rails construction ensures that tools and batteries continuously deliver optimum power output even during high-current demands. The Extreme Protection Technology (XPT) and wire mesh intake cover to safeguard the motor and bearings from dust, debris, and water and ensure long-lasting usage. Included 40 Volts max XGT 4.0 Ah battery charges in less than 45 minutes. These tools, batteries, and chargers come with a limited warranty of 3 years.
FEATURES
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4" stroke length for faster cutting
- Rear Handle 7-1/4" Circular Saw with Makita-built brushless motor delivers 6,400 RPM for faster cutting and ripping; cuts 2-9/16" at 90°
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
- XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
SPECIFICATIONS
Brand Name
Makita
Assembled Weight (lbs)
48.750
Battery Ampere-hour (Ah)
4.0
California Proposition 65 Warning Required
Yes
Charger Included
Yes
Country of Origin
China
CSA Certified
No
ETL Listed
No
Keyless / Keyed Blade Change
Keyless
MFG Part # (OEM)
GT500M
Number of Batteries Included
1
Number of Tools Included
5
Package Contents
40V max XGT Brushless 1/2" Hammer
Driver-Drill (GPH01Z); 40V max XGT Brushless 4-Speed Impact Driver (GDT01Z);
40V max XGT Brushless Recipro Saw (GRJ01Z); 40V max XGT Brushless Rear Handle
7-1/4” Circular Saw (GSR01Z); 40V max XGT Cordless L.E.D. Flashlight (ML001G);
(2) 40V max XGT 4.0Ah Battery (BL4040); 40V max XGT® Rapid Optimum Charger
(DC40RA); Tool Bag w/Wheels (831269-3)
Package Depth
36.000
Package Height
14.000
Package Weight
48.750
Product Condition
New
UL Listed
Yes
Warranty Type
3
Years
Makita 40V max XGT Brushless Cordless 5-Piece Combo Kit (4.0Ah) - GT500M
- Product Code: GT500M
Makita 40V max XGT Brushless Cordless 5-Piece Combo Kit (4.0Ah) - GT500M
The Makita XGT 40 Volts max cordless 5-piece combo kit has premium tools that are ideal for all your drilling, cutting, and driving applications. This kit contains GPH01Z, GDT01Z, GRJ01, GSR01, ML001G, two 40 Volts max XGT 4.0 Ah batteries, a charger, and a tool bag. The 2-speed hammer driver-drill is built with a brushless motor, which offers the optimum performance of 0 - 650 and 0 - 2600 RPM, 0 - 9750 and 0 - 39000 BPM, as well as 1250 in-lb of torque. The impact driver with 4-speed power selection ensures a maximum torque of 1950 in-lb. The recipro saw offers 1-1/4 Inch stroke length as well as 0 - 2300 SPM at low mode and 0 - 3000 SPM at high mode. The 7-1/4 Inch circular saw embedded with a 6400 RPM brushless motor offers up to 2-9/16 Inch cuts at 90 degrees. This kit comes with 4 LED flashlights, which provide high illumination of 160 lumens. The XGT digital communication safeguards the device from overload, over-discharge, and overheating, thus making this tool perfect for use in heavy-load applications. The XGT multi-layer contact interface and sturdy rails construction ensures that tools and batteries continuously deliver optimum power output even during high-current demands. The Extreme Protection Technology (XPT) and wire mesh intake cover to safeguard the motor and bearings from dust, debris, and water and ensure long-lasting usage. Included 40 Volts max XGT 4.0 Ah battery charges in less than 45 minutes. These tools, batteries, and chargers come with a limited warranty of 3 years.
FEATURES
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,100/ 0-2,600/ 0-3,600/ 0-4,400 IPM) provides 1,950 in.lbs. of Max Torque
- Recipro Saw delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute and a 1-1/4" stroke length for faster cutting
- Rear Handle 7-1/4" Circular Saw with Makita-built brushless motor delivers 6,400 RPM for faster cutting and ripping; cuts 2-9/16" at 90°
- High-luminance 4 L.E.D. flashlight provides 160 lumens
- XPT is engineered to provide increased dust and water resistance in harsh job site conditions
- The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
- XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
SPECIFICATIONS
Brand Name
Makita
Assembled Weight (lbs)
48.750
Battery Ampere-hour (Ah)
4.0
California Proposition 65 Warning Required
Yes
Charger Included
Yes
Country of Origin
China
CSA Certified
No
ETL Listed
No
Keyless / Keyed Blade Change
Keyless
MFG Part # (OEM)
GT500M
Number of Batteries Included
1
Number of Tools Included
5
Package Contents
40V max XGT Brushless 1/2" Hammer
Driver-Drill (GPH01Z); 40V max XGT Brushless 4-Speed Impact Driver (GDT01Z);
40V max XGT Brushless Recipro Saw (GRJ01Z); 40V max XGT Brushless Rear Handle
7-1/4” Circular Saw (GSR01Z); 40V max XGT Cordless L.E.D. Flashlight (ML001G);
(2) 40V max XGT 4.0Ah Battery (BL4040); 40V max XGT® Rapid Optimum Charger
(DC40RA); Tool Bag w/Wheels (831269-3)
Package Depth
36.000
Package Height
14.000
Package Weight
48.750
Product Condition
New
UL Listed
Yes
Warranty Type
3
Years
- Brand: Makita
- Viewed: 170
- Availability: In Stock